Skinister Medical Adhesive 1oz Sample Bundle
$39.99
- Description
- Adhesive Description
- Remover Description
Description
Instructions for Use
Apply a thin coat to clean, dry skin and the adhesive side of your ostomy appliance. Applying both surfaces can create up to 50% more adhesive strength.
Spray around the stoma.
Apply a light coat to the skin where your wafer or barrier will sit.
Avoid spraying directly on the stoma or mucous membrane.
- Use a thin coat, not a heavy wet layer.
- Keep adhesive inside the wafer contact area.
Coat the skin-facing side.
Spray the adhesive side of your wafer, flange, hydrocolloid barrier, or adhesive border.
Works with common one-piece and two-piece systems from Hollister, ConvaTec, Coloplast, and other major ostomy brands.
- One-piece: spray the attached wafer or barrier.
- Two-piece: spray the skin-facing side of the wafer.
- Cut-to-fit: avoid overspraying into the stoma opening.
Wait 60 seconds.
Let the adhesive become tacky before applying your pouch. This helps the solvent evaporate and prevents a wet, slippery bond.
Now you’re ready for a stronger seal.
Place your pouching system over the stoma and press firmly around the barrier for at least 60 seconds.
That’s it. You’re ready to help prevent leaks and extend wear time.
Removal tip: Use Skinister Medical Adhesive Remover around the edges and gently peel.
Follow your ostomy nurse or healthcare provider’s guidance. Do not apply to broken skin, open wounds, the stoma, eyes, or mouth.
Shop Medical Adhesive Spray →Remove it gently.
When it is time to change your pouch, use Skinister Medical Adhesive Remover to loosen the seal.
Spray around the wafer or barrier edge, then peel slowly while working more remover underneath.
Tip: Go slow and let the remover do the work. It helps lift the barrier more comfortably and wipe away leftover adhesive.
- Start at the outer edge.
- Peel gently while adding remover underneath.
- Wipe away any remaining residue.
- Avoid the stoma, eyes, and mouth.
Product Documents
PRODUCT DESCRIPTION
Skinister Medical Adhesive spray offers long-lasting adhesion, extended wear time, and leak prevention for medical appliances like ostomy bags, silicone breast forms, and condom catheters. This medical-grade skin glue is hypoallergenic, gentle on sensitive skin, and waterproof. Enjoy a secure hold while bathing, swimming, or exercising. Pair with Skinister Medical Adhesive Remover for easy, sting-free removal.
Seeking a replacement for the discontinued Hollister Adapt 7730? Our non-aerosol formula is safe to apply directly to skin and up to 50% stronger when used as directed!
SUGGESTED USES
Ostomy Adhesive Spray
Securely attach and seal your barrier ring or colostomy bag with this versatile stoma adhesive, helping to reduce leaks and extend wear time. Save both time and money with fewer bag changes. This waterproof ostomy adhesive spray is an essential addition to your ostomy supplies, and it enables users to bathe, swim, and exercise with confidence.
Breast Form Adhesive
Secures mastectomy breast forms and prosthesis breast forms, providing a realistic feel and lifelike movement. Enjoy the fashion flexibility of a waterproof breast form adhesive, even during swimming or beach outings.
Condom Catheter Adhesive
Skinister silicone skin glue is clinically tested to reduce leaks and slippage of condom catheters, keeping users clean and dry.
Versatile Skin Glue
A versatile prosthetic adhesive glue for skin, including maxillofacial prosthetics, continuous glucose monitoring (cgm), wound vac, tracheostomy, Special FX makeup, tapes, bandages, wig glue, and more.
It's also effective at restoring self-adhesive surfaces of sticky bras, and self-adhesive breast forms.
EXPERIENCE THE SKINISTER ADVANTAGE
Aerosol-Free for Superior VALUE, SAFETY & PERFORMANCE
Are you seeking a replacement for the discontinued Hollister medical adhesive? Our engineers recognized that Hollister adhesive spray offered stronger performance when applied to both surfaces, but its aerosol-based formula wasn’t approved for direct-to-skin application, limiting its full potential. That’s why we engineered a superior replacement that's aerosol-free and safe to apply directly to skin!
KEY BENEFITS:
- 50% Stronger – Safe to apply directly to skin and up to 50% stronger when used as directed.
- Superior Value – 100% silicone adhesive and free from diluted aerosol propellants, ensures more adhesive per dollar.
- Enhanced Safety - Safe to apply directly to skin, and without the hazards of flammable aerosol propellants.
INSTRUCTIONS FOR USE
Spray/Apply
- Wash surfaces with soap and water as needed, and allow to fully dry.
- Apply 1-2 light coats of skin adhesive to the appliance and spread with a fingertip if needed.
- For even more strength, optionally apply adhesive to the skin. Adhesion is up to 50% stronger when applied to both surfaces.
Allow to Dry
- Allow adhesive to fully dry before applying appliance to skin. (~1 min)
Apply with Pressure
- Press and hold device against skin with moderate pressure for at least 60 seconds.
Removal
- Remove with Skinister Medical Adhesive Remover.
EMPOWERING YOUR EVERYDAY ADVENTURES
Skinister Medical Adhesive Remover is formulated to remove Skinister Medical adhesive and other silicone based adhesives from skin. It is commonly used to aid in removal of ostomy appliances, mastectomy breast forms, condom catheters, and maxillofacial prosthetics. It may also remove adhesive residue on skin from certain medical bandages and medication patches. Reusable devices, such as breast forms and maxillofacial prosthetics may be cleaned with Skinister Medical Adhesive Remover.
Usage Instructions
Skinister Medical Adhesive Remover may be sprayed directly onto skin or applied to a clean wipe, cotton swab, or other applicator to clean the skin or device. Gently work the remover around the edges of the device, and begin peeling off at an edge. Avoid contact with any broken skin or wounds and mucous membranes (eyes, nose, mouth and stomas). Caution should be exercised around eyes, nose and mouth. There should be no residue after use, and additional cleaning is not needed unless area is otherwise soiled.
